When you login first time using a Social Login button, we collect your account public profile information shared by Social Login provider, based on your privacy settings. We also get your email address to automatically create an account for you in our website. Once your account is created, you'll be logged-in to this account.
DisagreeAgree
I allow to create an account
When you login first time using a Social Login button, we collect your account public profile information shared by Social Login provider, based on your privacy settings. We also get your email address to automatically create an account for you in our website. Once your account is created, you'll be logged-in to this account.
DisagreeAgree
1 Comment
Oldest
NewestMost Voted
bobdog
5 years ago
I use the third method, but I remove the firing pin, seat long, and then make small adjustments to my seating die until I can feel the bolt drop without resistance. It’s a little fussier, but it’s very accurate, and your seating die is properly adjusted when you finish.
It’s important to remove the firing pin because you won’t be able to feel the bolt drop.
If you use Wilson hand dies, and you want to shoot .020″ off the lands, just slip an .020″ shim on the plunger and you’re done. Further adjustments are easy, just by changing the shims.
Woiks fer me. It’s pretty accurate.
Never did like those Stony Point things, because no matter how many times you do it, you’ll get different results every time. If you do use them, make sure you repeat the process four or five times. The Loctite method looks like it would be more accurate than the Stony Point method.
Either way, you still have to transfer the measurement to your seating die, and that’s got repeatability issues of it’s own. My method uses the die itself to set seating depth to the lands, so it’s repeatable.
That’s my two cents. Double your money back if not completely satisfied.
This article is filed under the category(s) Firearms,Guns and was published October 14th, 2021 by Herschel Smith.
If you're interested in what else the The Captain's Journal has to say, you might try thumbing through the archives and visiting the main index, or; perhaps you would like to learn more about TCJ.
I use the third method, but I remove the firing pin, seat long, and then make small adjustments to my seating die until I can feel the bolt drop without resistance. It’s a little fussier, but it’s very accurate, and your seating die is properly adjusted when you finish.
It’s important to remove the firing pin because you won’t be able to feel the bolt drop.
If you use Wilson hand dies, and you want to shoot .020″ off the lands, just slip an .020″ shim on the plunger and you’re done. Further adjustments are easy, just by changing the shims.
Woiks fer me. It’s pretty accurate.
Never did like those Stony Point things, because no matter how many times you do it, you’ll get different results every time. If you do use them, make sure you repeat the process four or five times. The Loctite method looks like it would be more accurate than the Stony Point method.
Either way, you still have to transfer the measurement to your seating die, and that’s got repeatability issues of it’s own. My method uses the die itself to set seating depth to the lands, so it’s repeatable.
That’s my two cents. Double your money back if not completely satisfied.